Pneumatic Conveying
Pneumatic Conveying
- Aptech.Uk.Com
A basic vacuum conveying system uses a metering device at the inlet, a pipeline, receiver and exhauster.
As there is no positive pressure at the inlet it is not necessary to fit a rotary valve, so large particles can be fed into the system without damage. Some products will be able to feed into the system using a double walled lance inserted into the bulk of the material. Some products which don’t feed freely will need a controlled feed from an upstream process.
The receiver needs to be sealed and vacuum tight to enable the system to operate effectively
Another possible benefit results from the system being under negative pressure; potential leakage of toxic or hazardous products is prevented.
The conveying rate for a vacuum system is limited by the negative pressure that can be created by different exhausters. We would typically not design a vacuum system to operate in excess of -400mbarg.
For More Information pneumatic conveying
Contact Us:
Address : Unit 1 Sutton Court, Bath Street , Market Harborough, Leics, LE16 9EQ
Phone: +44 (0)1858 410737
Email : sales@aptech.uk.com
https://twitter.com/home?status=Reading%20-%20https://www.aptech.uk.com
https://www.facebook.com/sharer.php?u=https://www.aptech.uk.com
https://uk.linkedin.com/company/aptech-powder-systems-ltd